{"id":10,"date":"2019-06-05T07:05:28","date_gmt":"2019-06-05T04:05:28","guid":{"rendered":"http:\/\/hal9k.ru\/?page_id=10"},"modified":"2025-11-04T20:22:43","modified_gmt":"2025-11-04T17:22:43","slug":"mod-installer-pro-2","status":"publish","type":"page","link":"https:\/\/hal9k.ru\/?page_id=10","title":{"rendered":"Mod Installer Pro 2 (3 for PX6)"},"content":{"rendered":"\n
\n
\n
\"\"<\/a><\/figure>\n<\/div>\n\n\n\n
\n

This application is designed to easily install Android 11 (only for PX6), 10, 9, 8 or 6 (for PX5) on any head unit on the MTCx or HCTx platform with a PX6 (rk3399), PX5 (rk3368<\/strong>) and PX30 (rk3326) processor.<\/strong> With it, you can install any compatible factory firmware, not just Hal9k Mod<\/a>.
The update does not<\/strong> require the presence of a \u201cGPS\u201d slot for booting the head unit from the SD card.<\/p>\n<\/div>\n<\/div>\n\n\n\n

The application has been tested on different types of MTCx and HCTx head units and has shown stable work. However, any flashing firmware on the head unit is a potentially dangerous operation. First of all, this applies to the head units on which Android 6 was installed from the factory. Therefore, the application is provided on an «as is» basis. The author is not responsible for any possible negative consequences.<\/span>
New firmware does not support all equipment installed in older head units. Therefore, I ask you to carefully read the next section before purchasing the application.<\/p>\n\n\n\n

Limitations<\/strong>
The MD725<\/strong> type 2 Bluetooth module works on Android 6, but does not work on Android 8 and 9.
In Android 10 and 11, no type of Bluetooth MD725 modules currently work.<\/strong>
How to find out that you have such a module: on the first page of the Factory settings, in the BT item, MD725 is selected. The command getprop bt.md725.type<\/strong>, executed in the terminal, answers 2<\/strong>.
Solution: install a separate Bluetooth module. The module can be found on magnitolog.ru<\/a> or on AliExpress<\/a>.

The SD-968<\/strong> Bluetooth module with firmware made in March 2017 or earlier works in Android 8, but does not work in Android 9, 10 and 11.
How to find out that you have such a module: on the first page of the Factory settings, in the BT item, SD-968 is selected. The command logcat -d | grep wind_log<\/strong>, executed in the terminal immediately after rebooting the device, answers «verison: Mar 31 2017<\/strong>«.
A module with firmware made in August 2017 or later will work in Android 9, 10 and 11.
Solution: replace the module driver with the old version (Link<\/a>) or replace the module with another one.

In addition, there may be other incompatibilities of the firmware you have chosen with your head unit, which I may not be aware of. This application is just a tool for installing firmware.<\/p>\n\n\n\n

How to get the app?<\/strong>
Make sure your head unit is built on an MTCx or HCTx<\/strong> platform. The MCU version must begin with the letters MTCD, MTCE, MTCP, MTCH, HCTG<\/strong>.
Make sure you can enter to the Android OS recovery of your head unit. This is not necessary, but very desirable.<\/p>\n\n\n\n

If you are not sure that your head unit is built on the MTCx or HCTx<\/strong> platform, send me these screenshots: Contacts<\/a><\/p>\n\n\n\n

\n
\n
\"\"<\/a><\/figure>\n<\/div><\/div>\n\n\n\n
\n
\"\"<\/a><\/figure>\n<\/div><\/div>\n<\/div>\n\n\n\n

The correct device serial number is located in the Settings app — System — About. If your PX5 head unit has a very old firmware Android 6 or Android 8, released before 2018, then you must first install the latest firmware from the manufacturer of HCT. Download: For Android 6<\/a>. For Android 8<\/a>.
If the old Android 9 firmware is installed on your head unit and you cannot find the serial number, update the firmware.<\/p>\n\n\n\n

Pay the required amount in one of the ways below. In response, during the day I will send you thanks and a link where you can download the application. The application is designed to work only on the head unit, the serial number of which you specified when paying. OTA Updates for Hal9k Mod<\/a> is a standalone product and must be purchased separately.
If you have already purchased a previous version of the application, you can take advantage of a 30% discount to purchase a new version for the same serial number<\/strong>.
If you purchased the previous version of the application in June 2020, you can get a new version for the same serial number<\/strong> for free.<\/p>\n\n\n\n

Cost: 850 rubles<\/strong> (in case of payment in rubles) or 16 euros<\/strong> (600 rubles or 11 euros with a discount) or the equivalent in another currency. If the payment system takes its fee from the transfer amount, increase the transfer amount by the fee amount.<\/strong><\/p>\n\n\n\n